linux – Banana Pi无法启动(红色LED亮)

我买了一些全新的香蕉皮,
这些是“Banana Pi-M2”和“Banana Pi-M3”

我试图在他们两个上安装Debian,但我无法让它工作.
我在这里完全遵循这个教程(Windows):
http://wiki.lemaker.org/BananaPro/Pi:SD_card_installation
将Debian保存在SD卡上.

问题总是一样的.按下“M3”上的电源按钮或插入“M2”时,只有红色LED亮起且没有任何反应.

LAN端口的LED保持关闭状态,因此接近Pi无法启动.

我使用的电源产生5V和2100mA,这应该符合Banana Pi的条件.

我试图安装的发行版是例如我从这里得到的Bananian:
https://www.bananian.org/download

还有像Debian这样的几个发行版:
http://www.banana-pi.org/m3-download.html
http://www.banana-pi.org/m2-download.html

我使用2个不同的SD卡进行了测试,并且只使用了USB记忆棒.
一切都产生了同样的错误.
我错过了什么吗?

提前致谢.

最佳答案
这听起来像是一个强大的局面.

如果你有一个桶式千斤顶而不是微型usb,请使用桶式千斤顶.

The pre-production samples of this board had the usual 4.0/1.7mm barrel jack for DC-IN BPi M2/M2+ also use. This has been replaced by a Micro USB jack on the first production batch in Dec 2015 leading to the usual sorts of problems banana-pi.org forums are full of (see also next paragraph for some reasons). Starting in May 2016 Micro USB has been replaced by the 4.0/1.7mm barrel jack again so powering is possible more reliable now. The Micro USB receptacle on the longer board side is USB OTG, also connected to the board’s PMIC and while looking like an alternative way to power the board that’s not recommended unless you love underpowering situations, reboot loops and the like.

转载注明原文:linux – Banana Pi无法启动(红色LED亮) - 代码日志